|
|
|
|
|
|
- This triple magazine pouch carries 3 AR-15 / M-16 type 5.56mm 30 or 20 round magazines in 3 seperate pouchs. The pouches are injection molded for strength and fully tension adjustable which allows security without cumbersome flaps. They also will work bullets forward or bullets to the rear. The pouches are attached to a thigh plate and a vertically adjustable hanger strap to suspend the pouchs below the belt line and an adjustable 2" leg strap to secure the assembly to the upper thigh. |
|
|
|
- Blade-Tech now draws from its own injection molded capabilities and its many years in the Kydex holster business, to produce low cost, high Quality polymer Double Mag Pouches. These pouches are made from a specially formulated polymer made for this type of injection molding. Stronger and more heat resistant than sheet material. The Millennium Double Magazine Pouches comes with an Adjustable Belt loop. This loop comes with a shim for the various belt widths; |
|
|
|
- These new Blade Tech pouches are injection molded. They are made with adjustable tension screws for retention and security so the cumbersome locking flaps are not needed. These pouches are ambidextrous, will work with bullets forward or bullets to the rear. The tension screws will be forward for Left handed users. Currently available with SR Loop belt attachments. |
|
|
|
- Black ejection holster for the Taser C2 Includes a belt clip and a magnetic flap closure. |
|
|
|
- The Automotive Aid Kit is a basic kit small enough to keep under the seat or in a glove box, but offering the same life saving supplies used by combat troops. The kit is encased in a ballistic polycarbonate case that not only protects the contents from the elements, but ensures that in case of an accident the contents are together will be in a condition to help you. The Automotive Aid Kit contains: 15 g of Celox, Gloves , Chem-Light, 2" fluff gauze, 4" Israeli Bandage, CPR Face Barrier, VioNex Wipes (2) and all contents of the Non-Emergency Kit. |
|
|
|
- The Bound Tree medical pocket mask is designed to be used by the professional rescuer and first responder. It includes a low resistance, one-way valve with a disposable 3m filtrete hydrophobic filter to help prevent the passage of liquids and secretions. The pocket mask offers superior protection for both rescuer and victim. Features include: disposable one-way valve and filter 99%+ viral and bacterial filter efficacy a pre-inflated cuff for a solid seal. |
|
|
|
- The PATENTED GHOST ROCKET: the world's fastest Trigger Control Connector-the new STANDARD for trigger connectors for Glocks. The ROCKET shortens the total length of trigger pull and reset enabling you to shoot faster and better. Faster because the total distance the trigger has to move to fire your pistol is reduced up to 60%. Better because once the pistol fires the trigger movement is stopped. |
|
|
|
- These Pearce Grip units replace the magazine base plate. They do not alter the capacity of the magazine and provide better comfort by adding approximately 1/2 inch of gripping surface. Key Benefits: These units blend with the contours and texture of the handgun and have a factory appearance They are made from high impact Polymer and withstand drop tests at temperatures from -20 F to 350 F They provide control and comfort without sacrificing conceal ability. Fits the Springfield XD full size and compact models in 45 ACP. |
|
|
|
- Blackhawk CQC Serpa holster for the Beretta 92 / 96 and the Speed Clip Platform attachment in one kit. Low Price Kit that combines the CQC SERPA Beretta M-9/92F holster with the unique injection molded S.T.R.I. |
|
|
|
- High density carbon-fiber polymer material Secures holsters, rails, and carbon-fiber accessories such as light and magazine cases Can be mounted to any S.T.R.I.K. |
|
|
|
- These Hydration Pouches were designed for those missions where you don’t need or want 100 oz of water on your back. They hold 40 ounces each, and can be mounted anywhere on a vest or pack with MOLLE. Originally designed by warfighters to mount on their sides during vehicle ops, they are adaptable to almost any hydration need. Carry more than one and use our patented quick disconnect to switch tube from one to another. Mount on side, back, front or on a pack with our patented speed clips Drink system protected by Microban® antimicrobial technology Market-proven bite valve and patent pending quick-disconnect system. |
|
|
|
- These Hydration Pouches were designed for those missions where you don’t need or want 100 oz of water on your back. They hold 40 ounces each, and can be mounted anywhere on a vest or pack with MOLLE. Originally designed by warfighters to mount on their sides during vehicle ops, they are adaptable to almost any hydration need. Carry more than one and use our patented quick disconnect to switch tube from one to another. Mount on side, back, front or on a pack with our patented speed clips Drink system protected by Microban® antimicrobial technology Market-proven bite valve and patent pending quick-disconnect system. |
|
|
|
- This sight adds the convenience of a flip up front sight along with the versatility of a bottom Picatinny Rail. All steel construction for superior strength in demanding conditions.The flip sight is easily concealed with the push of a button and locks in the deployed position. This sight accepts all standard AR sight posts and hardware (included). The picatinny bottom rail is great for laser sights, flashlights, etc. |
|
|
|
- The CompStock has been received with enthusiasm by sportsmen, competitive shooters and law enforcement due to its ability to dramatically reduce recoil with light and heavy loads. Law enforcement officers, required to qualify with a shotgun, will find the Comp Stock the secret to higher scores and better field results. Hunters and competitive shooters will find their scores and hit ratios improving as flinching and recoil anticipation dramatically decreases. Laboratory tests conclude that the improved patented recoil reducing system of the CompStock actually slows the entire recoil cycle down and absorbs more than 54% of the net peak recoil. Using a cam roller extension spring the Comp Stock system removes painful recoil. |
|
|
|
- This small yet rugged carrier is designed to carry the smaller personal-sized lights that are so popular with police officers, soldiers and civilians, such as the Surefire 6P and 6R and Streamlight Scorpion, T-2 and T-3. The built-in tensioning device allows the use of all these lights and keep them in place and ready for use. The button recess at the bottom of the carrier prevents the accidental activation of light switches that protrude from the tail cap. The Blackhawk Compact Light Carrier also has the same belt clip as Blachawk magazine cases and can be removed from the belt clip and used on one of the Dual Rail Accessory Platforms. |
|
|
|
- Black holster for the Taser C2 Includes a belt clip and a magnetic flap closure |
|
|
|
- With the popularity of the Glock compact and sub compact pistols, a popular option is to use a larger capacity magazine as a backup. But when this is done, there is a gap between the grip of the pistol and the magazine. A&G has develop a spacer sleeve that is secured in place by a set screw and eliminates the gap left with these combinations of magazines and pistols. This extension will fit a full size Springfield XD magazine and allow it to be used in a sub compact Springfield XD magazine. |
|
|
|
- With the popularity of the Glock compact and sub compact pistols, a popular option is to use a larger capacity magazine as a backup. But when this is done, there is a gap between the grip of the pistol and the magazine. A&G has develop a spacer sleeve that is secured in place by a set screw and eliminates the gap left with these combinations of magazines and pistols. This extension will fit a Glock 20/21 magazine and allow it to be used in a Glock 29/30. |
|
|
|
- With the popularity of the Glock compact and sub compact pistols, a popular option is to use a larger capacity magazine as a backup. But when this is done, there is a gap between the grip of the pistol and the magazine. A&G has develop a spacer sleeve that is secured in place by a set screw and eliminates the gap left with these combinations of magazines and pistols. This extension will fit a Glock 19/23/32 magazine and allow it to be used in a Glock 26/27/33. |
|
|
|
- With the popularity of the Glock compact and sub compact pistols, a popular option is to use a larger capacity magazine as a backup. But when this is done, there is a gap between the grip of the pistol and the magazine. A&G has develop a spacer sleeve that is secured in place by a set screw and eliminates the gap left with these combinations of magazines and pistols. This extension will fit a Glock 17/22/31 magazine and allow it to be used in a Glock 26/27/33. |
|
|
|
- With the popularity of the Glock compact and sub compact pistols, a popular option is to use a larger capacity magazine as a backup. But when this is done, there is a gap between the grip of the pistol and the magazine. A&G has develop a spacer sleeve that is secured in place by a set screw and eliminates the gap left with these combinations of magazines and pistols. This extension will fit a Glock 17/22/31 magazine and allow it to be used in a Glock 19/23/32. |
|
|
|
- Blackhawk Tactical Release STRIKE Sling Features: Made of high density elastic bungee, tublar nylon, and nylon web Adjustable length Metal snap hooks at both ends attach to most weapon systems, brackets or attchment buckles as well as to S.T.R.I. |
|
|
|
- Replacement foam over-tube for the Ace ARFX, AR-UL and UL-M stocks. Length 8" inside diameter 1 1/8". |
|
|
|
- Soft, rubber butt pad reduces felt recoil on all AR's. Contoured to fit your shoulder, provides a non-slip fit that improves comfort and control. Fits Ace AR-15 ARFX stocks, adds 1⁄2" to length. SPECS: |
|
|
|
- ACE Skeleton Buttstock The Ace Skeleton Stock is lighter than a standard stock while still retaining high strength and durability. A closed-cell foam overtube provides a comfortable cheek weld and insulates the shooter's face from vibration and temperature extremes. This stock offers 3 sling positions: right and left behind the receiver and at the toe of the butt. Includes a 1/2" thick rubber recoil pad and uses a standard A1/A2 receiver extension tube, buffer and spring (not included). |
|
|
|
- Factory New & unfired Mossberg 500 TACTICAL CRUISER 6-SHOT pump-action shotgun in 12 ga. Manufacturer: Mossberg Model #: Model 500 Tactical Cruiser Type: Shotgun Finish: |
|
|
|
- Yankee Hill Machine Four Rail Free Float Forearms Utilizing anti-rotation screws to insure that the forearm stays solid even under strenuous use. With the addition of the anti-rotation screws the YHM forearms are now even better suited for forward grips and optics. Features include: mounting points for the YHM Swiveling Sling Studs (YHM-9469), Mil. Spec. |
|
|
|
- Yankee Hill Machine Four Rail Free Float Forearms Utilizing anti-rotation screws to insure that the forearm stays solid even under strenuous use. With the addition of the anti-rotation screws the YHM forearms are now even better suited for forward grips and optics. Features include: mounting points for the YHM Swiveling Sling Studs (YHM-9469), Mil. Spec. |
|
|
|
- Yankee Hill Machine customizable free float forearm tubes include one (1) full length 1/4" tall standard height rail that will co-witness with a flat top upper receiver and one (1) 3" 3/8" tall elevated rail. They feature slotted heat vents, two mounting points for Swiveling Sling Studs (YHM-9469), sold separately, and they also accept the Forearm End Caps (YHM-9484A or YHM-9484B) which are also sold separately. Each tube is drilled and tapped at the 3, 6, 9 and 12 oclock positions to accept YHM custom rails. The rails must be purchased separately. All assemblies include: |
|
|
|
- Yankee Hill Machine customizable free float forearm tubes include one (1) full length 1/4" tall standard height rail that will co-witness with a flat top upper receiver and one (1) 3" 3/8" tall elevated rail. They feature slotted heat vents, two mounting points for Swiveling Sling Studs (YHM-9469), sold separately, and they also accept the Forearm End Caps (YHM-9484A or YHM-9484B) which are also sold separately. Each tube is drilled and tapped at the 3, 6, 9 and 12 oclock positions to accept YHM custom rails. The rails must be purchased separately. All assemblies include: |
|
