|
|
|
|
|
|
- It's been said that a long gun without a sling is like a handgun without a holster. We strongly believe that to be a true statement. But, not all slings are created equal. Our CQB Tactical Slings are simple, versatile, durable, and affordable. The 3 point sling design is nothing new. |
|
|
|
- The Magpul Mission Adaptable Grip(MIAD) is a drop in replacement for the pistol grip on the M16/M4/AR15 series of rifles. The kit features: removable and replaceable front and rear panels for a custom fit over multiple hand sizes improved ergonomics and positive rough texture on both sides and rear backstraps a removable inner core that allows for storage (3 round plug included) Custom storage of batteries (waterproof) or bolt/firing pin is available with optional cores 3 size backstraps (s,m,l), 2 frontstraps, 3 round core plug, installation hardware. MIAD Resources: Aggressive no-slip texture Small (B1), medium (B2), and large (B3) back-straps A1 and A2 style front-straps Three-round 5. |
|
|
|
- Manufactured by JP Enterprises Reduced power spring kit, once installed it yields about 4 to 4.5 lb pull with standard AR-15 trigger parts. |
|
|
|
- ArmaLite 1 Piece Scope Mount Assembly for 1 inch scopes Mfr part # EX0027 The ArmaLite 1 Piece Scope Mount Assembly for 1 inch scopes is a one piece unit that attaches directly to your Picatinny rail. It will accept most scopes with a 1 inch tube design. Made from a rugged lightweight alloy, this mount will keep your scope secure and will not weigh you down. The one piece design offers stability not found in multipart scope mounts, which is crucial for accuracy and efficient target acquisition. ArmaLite scope mounts provide reliable, repeatable engagement with all MIL-STD 1913 (Picatinny) rail systems, and will place the scope centerline at the same position as the iron sights on a AR15-A2 rifle. |
|
|
|
- The Command Arms SST2 has the same features as the SST1, but also incorporates a rubberized coating for increased comfort. Features: Greatly increases the cheek support while shooting Significantly improves the cheek and head stability while aiming and shooting - eliminates the typical head movement and fatigue associated with sighting in targets for extended periods Faster target acquisition and stay on target Can store up to six CR123 batteries Can store cleaning materials and other small gun parts Waterproofed Lightweight Suitable for butt stocks manufactured by CAA, Colt, Bushmaster, Tapco, Rockriver Arms, Armalite, Colt Canada and many more Lifetime warranty through Command Arms. |
|
|
|
- The Non Emergency Aid Kit contains items to help with daily issues: various types of band aids, Tylenol and alcohol wipes. It is designed to be carried in the glove box of your vehicle, shooting bag, in a tool box or included with other more extensive kits. At a minimum, everyone should carry one of these. The Non Emergency Aid Kit includes: |
|
|
|
- The Law Enforcement Personal Aid Kit is designed to be worn on a duty belt or vest and provides the first responder with the ability to treat a single penetrating wound or laceration with a trauma bandage and Celox clotting agent. This is also a great option for those in the military to carry on their vest or pack. The belt carrier for the the LEPAK comes with: Celox, Nitrile Gloves, 4 inch Israeli Bandage, a CPR face shield, personal VioNex decontamination wipe (3) and a Non-Emergency Aid Kit. The Non Emergency Aid Kit includes: |
|
|
|
- The Individual Trauma Kit is intended to be used while treating life threatening traumatic injuries such as amputations, punctures, deep cuts, and abrasions. The Individual Trauma Kit is compact and can easily be stowed in the glove box of a vehicle, in a shooting bag or anywhere in the home, vehicle or jobsite. It is also a great supplement for a pre-existing jobsite or home first aid kit for those with EMS level trauma, and bleeding control tools. The Kit contains: Celox (15 grams), Nitrile gloves, Chem Light, Z-Pack Gauze, 4 inch Israeli Bandage, 2 inch Kerlix rolls (2), and 3 inch Elastic bandage. |
|
|
|
- The 4 - 14 x 56 rifle scope with an illuminated 4A reticle is a true work of art in the optical field and is ideal for long range hunting. Its features include: photo engraved glass reticle. Full multicoating and anti-reflection treatment eliminating glare and maximizing light transmission. One piece "O" ring sealed and nitrogen filled alloy housing. |
|
|
|
- This gas block replaces your existing front sight tower to provide a simple, low profile design that can be used to mount a rifle length forearm to a carbine length barrel. It is mounted by the use of two set screws. Manufactured from high quality steel and finished with a mil. spec. phosphate coating. |
|
|
|
- Layered construction and Neoprene outer shell keeps noise levels down and comfort up. High-density, closed-cell foam core provides excellent impact resistance and minimal moisture retention. Textured contact area sewn to outer face of Neoprene shell increases durability and improves grip while crawling. Unlike other Neoprene knee pads, the interior is contoured along upper half to cradle the knee, preventing slippage and lateral movement. Soft, rubberized layer sewn to inner face further prevents slippage. |
|
|
|
- Magnetic base for 6, 10 and 12 inch lightsticks. Lightsticks sold separately. |
|
|
|
- Full capacity stainless steel magazines for the Springfield XD Compact Pistol. These magazines are manufactured by Springfield Armory and have no LE markings on them. If you are unclear about the legality of buying high capacity magazines in your city or state, please click here for the current state and local restrictions. It is the buyers responsiblity to be aware and accountable for any purchase which could violate a local or state law. Hi-Capacity Magazine Policy: |
|
|
|
- The BlackHawk Night-Ops Sentinel PL1 produces a more than impressive 35 lumens in an unbelievably compact size. This entire light is small enough to fit into the palm of your hand but bright enough with its pre-focused design to illuminate objects or persons at a distance up to 40 meters. At less than 2 oz. you can even mount this versatile lighting tool on the bill of your ball cap (via the pocketclip design) to illuminate diminished light work areas for up to 3 hours. This digitally controlled light allows maximum brightness for extended durations utilizing only one CR123A lithium battery. |
|
|
|
- The BlackHawk Night-Ops Legacy X6 is a tactical light that is tailcap switch activated and features an anti-roll system, Xenon lamp assembly and produces 65 true lumens of intense white light output. 65 lumens is equivalent light output to a 6 or 7 Cell flashlight. The beam signature is a perfectly concentrated pre-focus beam and has no shadows or ugly artifacts that many focusable lights in the world today can experience. The clickable tailcap switch allows the user to operate this lighting tool in momentary or constant on modes. Operates on two CR123A lithium batteries. |
|
|
|
- BlackHawk HellStorm Advanced Tactical Knee Pads V.2 Newly re-designed for maximum performance! Unlike any other hard-shell elbow pad! Features: New dual injection - molded flex cap design Allows maximum flexibility for ease of movement and comfort Minimizes gap between the bottom of the cap and nylon carrier when flexed New padded side extensions provide additional comfort and improved strap positioning New contoured interior ledge prevents pad from slipping downward 600 Denier nylon shell Closed-cell foam padding provides excellent shock resistance and little or no moisture retention Hook and loop elastic straps. |
|
|
|
- These low profile rail covers have a slim design that effectively protects the rails from damage. Made from a tough plastic composite, these covers snap on easily and provide protection for any picatinny rail. |
|
|
|
- This OEM Compensator reduces muzzle climb during repeat and rapid firing. It can be attached to any .223/5.56mm rifle barrel with a muzzle threaded to ½-28 TPI. |
|
|
|
- Standard CAR-15 / M4 Buffer and Spring Set Mil Spec OEM manufactured Standard Carbine buffer and Carbine spring. For use only in M16 / AR15 / CAR-15 / M4 rifles using the carbine sized (CAR-15 / M4) receiver extension. |
|
|
|
- Commerical Width Receiver Extension (Buffer Tube) Replacement upgrade for your AR15, M16, Car-15 or M4. 6 position aluminum receiver extension (buffer tube) machined to commercial dimensions. Commerical receiver extensions have a slightly larger dimension than the comparable Mil Spec part. To be used when a commerical sized AR15 / M16 / Car-15 / M4 stock is used. From the factory, the following companies used the commerical sizings: |
|
|
|
- The M4 style Handguard has a more pronounced oval shape and is taller in cross section than a traditional CAR-15 handguard. This and the improved heatshield effectively increase barrel cooling - especially in rapid fire. This improved handguard set will fit most carbines with carbine length gas systems. Molded of black thermoplastic composite material with heavy duty aluminum heat shields. |
|
|
|
- Use this enhanced design tele stock to easily convert Your AR-15 or fixed stock CAR-15 Rifle To true CAR-15 or M4 dimensions. This unbreakable, collapsible butt stock instantly makes the AR-15 / M16 lighter, shorter, compact and easier to carry. The sling swivel can be offset to either left or right. Latch hardware and sling swivel are included. Mounting hardware sold separately. |
|
|
|
- Configures any weapon with a butt stock to accept a single-point sling such as the Specter Gear MOUT Sling. The Sling Adapter is constructed of heavy duty nylon webbing and includes arobust metal "D" ring. |
|
|
|
- With spare Snap Hook attachment assemblies in use on several different weapons, you're guaranteed to have consistent sling fit with each weapon, since only one sling is involved. |
|
|
|
- The MOUT Sling was designed with direct input from US Military troops returning from MOUT operations in Afghanistan and Iraq. Designed specifically for Military Operations in Urbanized Terrain (MOUT) this sling offers some serious advantages that are equally useful to law enforcement tactical units, armed citizens and practical shooting competitors. Similar to the HST Sling, the MOUT Sling excels in the urban dynamic entry role. Used on a weapon with a side receiver sling mount, the snap hook attachment secures the sling to a single mounting point. This arrangement allows the operator to simply arc the buttstock over the sling for an easily accomplished cross shoulder transition. |
|
|
|
- BlackHawk 44 inch Padded 2 Gun Weapons Case Perfect for the 3 gun competitor. The Blackhawk Padded Weapons Case is designed to carry multiple weapons including a pistol, rifle, shotgun, or any variation of weapons. Great for carrying pistol, rifle, shotgun, and SMG with accessories. Can also be laid out flat to serve as a shooting mat. Keep your weapons secure and protected with BlackHawks Padded Weapons Case. |
|
|
|
- High quality forged A2 style aluminum lower receivers with mil-spec hardcoat anodized finish. Made in USA. Due to Federal firearms regulations, a Form 4473 or transfer to a receiving FFL is required for the purchase of this receiver. If you are unsure of the procedure, please click here for more information. |
|
|
|
- The Polymer Magazine (PMAG) is a lightweight 5.56 NATO, M-16 compatible magazine. The PMAG features a pop-off storage/dust cover that alleviates pressure from the magazine feed lips, allowing for storage of loaded magazines without risk of feed lip creep that often causes malfunction in standard aluminum magazines. PMAG utilizes a resilient stainless steel spring for corrosion resistance. Features: |
|
|
|
- Nordic Components - extended magazine tubes for Beretta Extrema and Benelli Nova shotguns These are the finest machined shotshell tube extensions currently available. Each tube has a unique swirl style barrel nut (image on left) adding a distinct touch while also providing a quick and sure grip. Currently available in +2, +3 and +4 configurations for the Beretta Extrema and Benelli Nova shotguns. Shell capacity is defined by Nordic as the shell increase above and beyond the standard capacity provided by the fixed magazine tube (tube inside the forearm). If your shotgun currently has a short tube extension, the round capacity of that extension would be lost as it is removed and replaced. |
|
|
|
- The top of the line 35" Bagmaster Tactical Rifle Case. Designed for the classical tactical rifle up to 35" in length. Fits the CAR-15, the folding stock Mini 14, folding stock HK-91 and HK-93 and other folding stocks. Main compartment: Each cases inside measurement is 35 inches width and 11 inches tall at the back end and narrowing to 5 inches tall at the front end. |
|
