25 most recent entries:
GTG in Red Deer - Sept 20 (Sep 05 2008 17:00 GMT)
From the ABDiesels site, we are invited to a GTG in Red Deer on the 20th. September 20, 2008 Red Deer Gasoline Alley Tim Horton's Meet at 2 pm From there we would be moving to a location, depending on turnout, for some pictures and possible cruise through the town.. Hope to see you there..
anti spin diff. (Sep 05 2008 16:39 GMT)
I was down at the dealer today and they told me I would need two bottles of the Mopar anti spin for my rear diff. they looked it up by vin and my truck has anti spin. I didnt think I needed it with mobil one syn 75-90. should I put it in when I change it. Thanks
Smokin hot deals on Weld wheels!! (Sep 05 2008 16:28 GMT)
This is an unbelivable deal on Weld forged wheels. The deal is 75% off on any Weld wheels, and have it shipped to your closest 4WP store so that you don't have to pay shipping. One such example of the deal, a $462 wheel is $115. Another example is a $316 wheel is $76. http:
Petron Plus oil and fuel additives (Sep 05 2008 16:17 GMT)
Has anyone used these products http://www. waglerspetronplus. com/facts. htm ?
Dyno Day Sarver, Pa (Sep 05 2008 16:08 GMT)
i hope this is alright to post. i am in no way affiliated with this shop and just want to put the word out. I got this info from another forum Sarver Automotive is going to host a DIESEL DYNO DAY SEPT 27, 9AM until 5PM. Cost is $60 for 3 pulls. Located on Sarver Rd, Sarver Pa.
Just installed prxb... WOW!! (Sep 05 2008 15:56 GMT)
what a big difference. finished the install yesterday, all in all not a bad install. took it out for a little test yesterday and was very impressed. it was like applying the brakes without applying the brakes (normal application). now i have to plan a trip camping so i have an excuse to tow with it.
Manifold pressure sensor (Sep 05 2008 15:56 GMT)
My manifold pressure sensor just went out. Has anyone else had this problem? I was driving on the freeway and suddenly lost fuel pressure. I run biodiesel, so I thought I just needed to change the fuel filter. Nothing happened, I got it to the dealership and they said the manifold pressure sensor was telling my rig to defuel because it thought my turbo was on the fritz.
Two Tone Paint and Fender Flares - Pics Anyone? (Sep 05 2008 15:53 GMT)
One of my winter projects is to get new paint on my 01. It's currently all white and I'm toying with the idea of using a two tone scheme with white on the top and tan below the side moldings, but I also would like to add some fender flares and I'm just not sure how it would look. Any pics would help. Thanks guys. Josh
What an expensive week (Sep 05 2008 15:32 GMT)
This last weekend while I was in Texas moving my folks, my wife was in the mountains here in Colorado with her horse. Her and a friend stopped for lunch and came out and the truck would not turn over. After calling a mobile mechanic on a holiday weekend, AAA only wanted to tow the truck and she could not leave her horses there, a new starter with labor cost nearly $600. When she came home Wednesday night she found most of her trailer lights not working save one turn signal an tail light. After searching this forum, I found the problem people have been having with the TIPM on 06 trucks.
a/c pump wires (Sep 05 2008 15:24 GMT)
I see two wires on the 89 a/c pump I have just like on the ford system I have. I need to connect mine to the cummins and wonder if this is a power and ground deal. The wires are one black and the other black with a white stripe I need to know if one is positive and the other ground and if Yes which one. Thank You.
yet another fuel stop solenoid ? (Sep 05 2008 15:21 GMT)
i just burnt out the relay again. i am not sure if the first one was stock or replaced by po. i cleaned it up and replaced the boot but maybe the solenoid is getting weak or something. i thought about getting a new relay, but then i also thought about a cable too after reading many posts. my question is has anyone done this or thought about this.
Latest diesel news from Ford. (Sep 05 2008 14:56 GMT)
The party is over Jeremy Cato, today at 10:18 AM EDT LOMMEL, Belgium; Just when we thought diesels would have a big future in Canada and the United States, along come the engineering types with a bucket of icy cold water. At least Ford's engineering types. Here at Ford's test track facility on the Dutch border a facility the industry calls a "proving ground";
DPF Delete and Emissions Tests (Sep 05 2008 14:44 GMT)
Those of you who have deleted your DPF and blocked off your EGR, how are you going about getting your emissions tests done? I know that plenty of people live in counties in TX that don't require emissions tests, but for those of you who do, what are you doing to get passed it? Are you keeping the DPF and reinstalling the day you go get your inspection or what? I'm just curious because I'm about as fed up with all this CEL BS and am not wanting to get rid of my truck. I'll prolly wait until my warranty is up but who knows for certain.
Getting a little smoke at idle, Problem ? (Sep 05 2008 14:43 GMT)
Got 96,000 miles on the meter and just started to notice a little smoke while the truck is at idle. Should I be worried ? What has changed ? Injector problems coming ? Trucks runs great by the way, just like always.
Anyone have wiring diagram of fuel sending unit? (Sep 05 2008 14:40 GMT)
Hello all, I am trying to figure out what wires on the fuel sending unit in the fuel tank go to what.. the connector has 4 wires coming off of it.. 2 of the wires are connected together into one.. so I am guessign that is ground.. then there are 2 other wires..
Electric Fuel Pump? (Aug 26 2008 02:49 GMT)
How many GPH? I see alot of people running the Holley Blue pump. Is this the one to get?
Sometimes, stupidity is boundless (Aug 26 2008 02:49 GMT)
http://www. foxnews. com/story/0, 2933, 410422, 00. html I can't believe this went as far as it did.
Low brake vacuum (Aug 26 2008 02:35 GMT)
Truck is in my sig... The other day while towing my trailer I was slowing down coming up to a stop sign and the brake pedal got REALLY hard, the vacuum assist was gone. The next intersection I came to it was fine and has been fine for a couple days. Tonight, I went to move my truck from one driveway to the other and at first the brakes were fine, then all of a sudden, no more vacuum and a VERY hard pedal. If I ran the RPM's up the vacuum came back and the pedal became normal again.
Springs or Studs???? (Aug 26 2008 02:32 GMT)
Like the title says, I have some money burning a hole in my pocket. I cant decide which one would be better for me. I would like to run the TNT/R tune for the MOST power from SMARTY, but if I decide to do twins in the future I think I will need studs! HELP a guy decide how to spend some $$$$....and possibly give a few suggestions as to why you would do it that way....
CAM Position Sensor Help (Aug 26 2008 02:29 GMT)
I get a code referencing my cam sensor. I have replaced the sensor and to no avail still get the code and the symptoms. It misses when it is acting up. Sometimes worse than others and sometimes it is really bad. I had already unhooked the Juice to seee if that was causing it but it doesnt appear to be.
Can you erase codes without dealer? (Aug 26 2008 02:27 GMT)
As you all know i just put in my 3rd rail pressure sensor. I have a few codes. (p0088,,p0192 etc..)Truck runs awsome now but engine light is still on. I unhooked both grounds on batteries but is there another way to erase codes without spending $100 at dealer?
headlights (Aug 26 2008 02:11 GMT)
ON my 99' 4x4 my headlights on dim are like a flashlight you bought at the dollar store on clearance but my brights work great .I have replaced the multi function switch and headlight switch any ideas?
Traction Bars Poll (Aug 26 2008 02:06 GMT)
How many of you over 700hp are not running traction bars? Please vote yes or no to the traction bars if you are at or over 700. I am trying to decide whether or not I need them. I don't pull and will only dyno occasionally, but I want to avoid excessive axle wrap. Jay
Bad clutch or starter noise at startup. (Aug 26 2008 02:02 GMT)
Every once in a while when I crank the starter over with the clutch depressed, the clutch or starter makes a loud POP. Kinda sounds like the clutch is stuck engaged and the starter pops it free. It just recently started this and it doesent sound healthy for the parts involved. I dont know if its related, but it is getting harder to shift into 2nd gear also. Anybody ever had this problem?
Brake upgrade (Aug 26 2008 01:58 GMT)
I would like to upgrade my brake system. Mostly starting with rotors and drums and new pads and calipers. While looking at Napa at their online store, I saw some of the rotors with the hubs already installed. Are they worthwhile to buy? I've never bought'em like that, I've always just beat the crap outta my rotors and hub to get it off.
|
